Antiscalant Crystal 5~16mm (NaPO3)n

1.Antisepsis ：Antiscalant Crystal 5~16mm Prevent microorganism from corroding pipeline in water, can slowly remove iron oxide in old pipes. Water Treatment:Scale Inhibitor And Reducing Agent

2.Antiscalant: After the water is heated, calcium carbonate and magnesium carbonate are prevented from combining, restrain the deposition of scale on metal surface.After the water is heated, calcium carbonate and magnesium carbonate are prevented from combining, restrain the deposition of scale on metal surface.
Anti-scale solar water heater、Anti-scale germicidal in household water system、 Anti-scale hot water boiler、 Anti-scale of water system in hotels and hospitals、 Swimming pool water system、 Prevent water pipe from rusting、 Prevent equipment from corrosion in water、 Prolonging service life of equipment、 Add minerals to the body

The method of using silicon-phosphorus crystals is very simple. First, load them into a medication tank and then connect the water source. The medication in the tank will undergo Brownian motion due to the impact of water flow, gradually dissolving into the water and exerting its pharmacological effects.

The "silicon-phosphorus crystals" water treatment technology is different from other water treatment agents and equipment in the domestic market. This technology is suitable for domestic water systems and combines the prevention of secondary water pollution with the protection of water-using equipment. It can solve issues such as "yellow water" and "red water," prevent corrosion of pipelines and equipment, and inhibit scaling during heating processes.
"Silicon-phosphorus crystals" are slowly dissolving spherical chemical agents. The medication is processed from various phosphates and silicates through a special manufacturing process. For a specific water system, installing a suitable capacity silicon-phosphorus crystal tank on the main pipeline is sufficient. When the system is in use, the "silicon-phosphorus crystals" enter the water system and start working.
To install the silicon-phosphorus crystal tank, follow these steps and requirements:
1. First, check if the equipment is damaged. If there are no abnormalities, proceed with the installation.
2. The equipment should be installed on a prepared concrete foundation platform. For household equipment, there is no need to fix it to the concrete foundation platform.
3. The installation form should be a bypass installation to allow the addition of silicon-phosphorus crystal medication without stopping the system.
4. The maximum outer diameter of the equipment should be no less than 1000mm away from the wall, and the distance between equipment should be no less than 1500mm.
5. The maintenance distance of the equipment should be no less than 500mm.
6.Pipe supports should be installed near the inlet and outlet of the equipment. For valves directly connected to the container with a size greater than or equal to DN150, supports should be installed beneath them.
7.Valves should be installed on the inlet, outlet, and bypass pipes of the equipment.
8. BTDR-15, 25, 40, 50FZ type equipment is connected to the pipeline with threads, while BTDR-65, 80, 100, 125, 150FZ type equipment is connected to the pipeline with flanges.
Scope of application:
These silicon-phosphorus crystals can be widely used in domestic hot water systems, drinking water systems, boiler makeup water systems, industrial circulating water systems, and makeup water systems for heat exchangers.

Product Packing